The first step is to fit the bracket to the TV, follow manufacturers instructions for guidance on screw types and make sure to use washers supplied, making sure screws are tight.
Next you must decide where on the plasterboard wall you will position the TV. Mark the centre position on the wall and a line where you wish the bottom of the plasma to be using a spirit level. To get the height of the wall mount, measure from the bottom of the screen to the top of the hook on the TV bracket and transfer this measurement to the wall. Measure from the line, where you wish the bottom of the screen to go to the distance you have already measured, this will ensure the desired height. Now line up the wall mount to the centre line and the measured line for the height, using the spirit level again for straightness, and mark holes on the wall.
Vizio Tv Mounts
There are two types of plasterboard wall; one of which is called 'dot and dab' where the plasterboard is fixed to the blockwork using an adhesive, and the other being Stud Wall. To determine which kind of wall you have, tap it - if there are solid sounding parts of the wall, then it is most likely dot and dab. This is the place most preferable to drill the holes. Usually, if the bracket covers a couple of the solid bits, then you will be fine, so be sure to fix the bracket here.
The alternative is that you have a stud wall, and in this case, be sure to attach the bracket to at least one stud, which will take the weight of your plasma/LCD.
Once you are certain that your fixtures are secure and the bracket is level, then you are ready to hang your TV up.
Special Price!!! Cheetah Mounts ALAMLB LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt and Swivel Articulating Arm
Nov 09, 2011 03:17:27
Click for larger image and other views
Cheetah Mounts ALAMLB LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt and Swivel Articulating Arm Feature
- Installation Manual, All Hardware and 6" Magnetic Bubble Level Included
- Single Stud Installation, Powder Coat Paint
- ±15° Tilt, 4° Rotation Adjustment
- 20" Extension, 180° Swivel
- Fits VESA 100 and 200, Up To 65Lbs
Cheetah Mounts ALAMLB LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt and Swivel Articulating Arm Overview
This mount fits the majority of displays in the 23-32" size range and some models up to 42". Specifically, it fits VESA 50 - 200 hole patterns and TVs weighing up to 65lbs. If you are unfamiliar with VESA patterns, these are square or rectangular patterns between 2 and 8 inches per side. This mount provides 20" of extension, 180 degrees of rotation, +/- 15 degrees of tilt, 4 degrees of rotation adjustment, and collapses to 2.7" from the wall. The load bearing portions of the mount are constructed from High Grade Steel providing a sturdy and reliable mount and separate cover pieces for the wall plate and pivot joints providing a clean finished look. The package includes the mount, manual, all necessary installation hardware, and a 6" three-axis magnetic bubble level. This mount also includes a 10' High Speed HDMI with Ethernet cable. The HDMI cable allows the use of home entertainment networking, audio return, 3D playback and delivers the sharpest, richest viewing and listening experience possible.SAVE NOW on the special offers below!
Available In Stock. |
| This Cheetah Mounts ALAMLB LCD TV Wall Mount Bracket with Full Motion Swing Out Tilt and Swivel Articulating Arm ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
